Put Fat in the Deep Freeze Before Summer
While it may take about 90 minutes to get to the beach here in King of Prussia, that doesn’t mean we don’t make the effort at least a couple times a summer. Throw in a day at the pool here and there. Regardless of the water source, we all want to look our best in our swimsuits. But unwanted fat that tends to accumulate in areas such as the lower abdomen, thighs, flanks, and other areas can make us turn down the pool party invite and keep things covered up.
That’s no way to go through life! Come see Dr. Lee and our team and let’s give that unwanted fat the cool shoulder with CoolSculpting®! CoolSculpting® is the revolutionary fat reduction treatment that reduces fat up to 25 percent in the treatment area in a completely non-invasive procedure. CoolSculpting® is the world’s most popular body contouring treatment. The start of a humid Pennsylvania summer is a great time to have CoolSculpting done to slim down your contours as the summer progresses.
It all started with a few popsicles
CoolSculpting® wasn’t the original intention when two scientists studied the effects of freezing on the cheek area. Two doctors at the Harvard Medical School and Massachusetts General Hospital, Drs. Dieter Manstein and R. Rox Anderson, were doing a study that theorized children who ate lots of popsicles growing up developed dimples in their cheeks more than children who didn’t eat lots of popsicles. Dimples form in the cheeks where the muscle isn’t covered with much fat, so when the muscle contracts a dimple forms. The idea was that the cold in the popsicles somehow affected the fat cells in the cheeks. The doctors called this Popsicle Panniculitis.
Based on what they thought could be happening in the cheeks, the two doctors made the next step and theorized that the same process/result could happen elsewhere. So, they investigated selectively freezing fat cells in a process they called cryolipolysis. The end result of those studies was CoolSculpting®.
How it works
To achieve cryolipolysis, CoolSculpting® involves a three-step process. First, a cooling panel uses suction to pull the target area skin into solid contact with the cooling plates. Then the cooling is directed downward into the skin. The temperature is precisely equal to the freezing point of fat cells, while not freezing adjacent tissue cells that freeze at a lower temperature. Exposure to this freezing causes fat cell apoptosis (a natural, controlled cell death). The body sends cytokines and other inflammatory mediators to the area to gradually digest the dead fat cells in the weeks following the CoolSculpting session. Lipids from the dead fat cells are slowly released and transported by the lymphatic system to be processed and eliminated from the body, in the same manner that fat in food is eliminated. It takes anywhere from three to 12 weeks for the body to permanently remove the dead fat cells.
The result? A 20 to 23% decrease in fat cells in the treatment area over the months following your CoolSculpting session with the team at Lux Skin Lasers.
Non-invasive and easy to take
The entire CoolSculpting® treatment is not painful. There is some minor discomfort when the cooling is first being delivered, but that passes as the area becomes numb with the cooling. And there isn’t any downtime. How cool, literally, is that?!
CoolSculpting has been approved by the FDA for eight areas: the abdomen, thighs, bra line fat, back fat, upper arms, flanks, underneath the buttocks, and the jowls. Do any of those areas need to chill out on your body?
Dr. Lee is one of the nation’s Top 150 CoolSculpting practices, so you can be assured you’ll get the body contouring results you’ll love. Call Dr. Lee at (610) 789-6701 and set up your CoolSculpting consultation.
Categories
- Blepharoplasty (11)
- Blog (99)
- BOTOX (12)
- Brow Lift (6)
- CoolSculpting (8)
- CoolTone (2)
- Cosmetic Surgery (18)
- Dysport (2)
- Eyelid Surgery (6)
- Facelift (7)
- Facial Fillers (12)
- Facial Rejuvenation (4)
- Infini RF Microneedling (2)
- Juvederm (6)
- Kybella (3)
- Laser & IPL (7)
- Laser Hair Removal (2)
- Latisse (1)
- Liquid Facelift (1)
- Medical Skincare (1)
- MedSpa (1)
- Plastic Surgery (12)
- Practice News (1)
- Ptosis (3)
- Rhinoplasty (1)
- Scar revision (1)
- Skin Care (5)
- Skin Care Products (1)
- Uncategorized (7)
Recent Post
Archives
- January 2023 (1)
- December 2022 (1)
- November 2022 (1)
- October 2022 (1)
- September 2022 (1)
- August 2022 (1)
- July 2022 (1)
- June 2022 (1)
- May 2022 (1)
- April 2022 (1)
- March 2022 (1)
- February 2022 (1)
- January 2022 (1)
- December 2021 (1)
- November 2021 (1)
- October 2021 (1)
- September 2021 (1)
- August 2021 (1)
- July 2021 (1)
- June 2021 (1)
- May 2021 (1)
- April 2021 (1)
- March 2021 (1)
- February 2021 (1)
- January 2021 (2)
- November 2020 (1)
- October 2020 (1)
- September 2020 (1)
- August 2020 (9)
- July 2020 (1)
- May 2020 (4)
- April 2020 (3)
- March 2020 (9)
- February 2020 (2)
- January 2020 (2)
- March 2019 (1)
- February 2019 (1)
- January 2019 (1)
- December 2018 (1)
- November 2018 (1)
- October 2018 (1)
- September 2018 (1)
- August 2018 (1)
- July 2018 (1)
- June 2018 (1)
- May 2018 (1)
- April 2018 (1)
- March 2018 (1)
- February 2018 (1)
- January 2018 (1)
- December 2017 (1)
- November 2017 (1)
- October 2017 (1)
- September 2017 (1)
- August 2017 (1)
- July 2017 (1)
- June 2017 (1)
- May 2017 (1)
- April 2017 (1)
- March 2017 (1)
- February 2017 (1)
- January 2017 (1)
- December 2016 (1)
- November 2016 (1)
- October 2016 (1)
- September 2016 (1)
- August 2016 (1)
- July 2016 (1)
- June 2016 (1)
- May 2016 (1)
- April 2016 (1)
- March 2016 (1)
- February 2016 (2)
- January 2016 (1)
- December 2015 (1)
- November 2015 (1)
- October 2015 (2)
- September 2015 (1)
- August 2015 (1)
- July 2015 (1)
- June 2015 (1)
- May 2015 (1)
- April 2015 (1)
- March 2015 (1)
- February 2015 (1)
- January 2015 (2)
- December 2014 (1)
- August 2014 (3)
- July 2014 (3)
- June 2014 (3)
- May 2014 (3)
- April 2014 (3)
- March 2014 (2)
- February 2014 (2)
- January 2014 (1)
- December 2013 (3)
- November 2013 (3)
- October 2013 (3)
- September 2013 (3)
- August 2013 (3)
- July 2013 (4)
- June 2013 (2)
- May 2013 (3)
- April 2013 (7)
- March 2013 (8)
- June 2012 (1)